- whatsapp +51955515985
- support@ecuforcetruck.com
- 24/7 Customer Support
Menu
Shop
Account
Subtotal: $0.00
No products in the cart.
Circuit Description
Before active regeneration of the aftertreatment diesel particulate filter, a diagnostic test on the system is performed. The aftertreatment fuel injector opens and relieves fuel pressure in the line. The aftertreatment fuel pressure sensor must be reading atmospheric pressure at this point in the test. The aftertreatment fuel injector closes and the aftertreatment purge air actuator opens. This pressurizes the aftertreatment fuel system to vehicle air pressure. The diagnostic then checks to make sure the aftertreatment fuel pressure sensor is reading vehicle air pressure. The aftertreatment fuel shutoff valve then opens and allows pressurized fuel to enter the system. The aftertreatment fuel injector then opens and primes the system by purging the air from the line. The aftertreatment fuel shutoff valve and aftertreatment fuel injector then close and trap the fuel between the aftertreatment fuel shutoff valve and the aftertreatment fuel injector. The diagnostic checks to make sure the system maintains fuel pressure.
Component Location
The aftertreatment fuel injector is installed in the exhaust system in the turbocharger adapter pipe. The aftertreatment fuel pressure sensor and aftertreatment fuel shutoff valve are installed in the shutoff valve manifold. The aftertreatment purge air actuator is located above the shutoff valve manifold.
Conditions for Running the Diagnostics
This diagnostic runs during active regeneration of the aftertreatment diesel particulate filter.
Conditions for Setting the Fault Codes
The Engine Control Module (ECM) detected an internally leaking aftertreatment fuel shutoff valve, aftertreatment purge air actuator, or a stuck closed aftertreatment fuel injector.
Action Taken When the Fault Code is Active
The ECM illuminates the amber CHECK ENGINE lamp and/or the Malfunction Indicator Lamp (MIL) immediately when the diagnostic runs and fails.
Active regeneration of the aftertreatment diesel particulate filter will be disabled unitl the next key cycle.
Engine torque will be reduced if the engine is operated for an extended period of time with this fault active.
Conditions for Clearing the Fault Code
To validate the repair, start the engine and perform the INSITE™ electronic service tool Aftertreatment Diesel Particulate Filter Regeneration Test.
The fault code status displayed by INSITE™ electronic service tool will change to INACTIVE immediately after the diagnostic runs and passes.
The ECM will turn off the amber CHECK ENGINE lamp immediately after the diagnostic runs and passes.
For On-Board Diagnostics (OBD) engines, the ECM will extinguish the Malfunction Indicator Lamp (MIL) after three consecutive trips where the diagnostic runs and passes.
The Reset All Faults command in INSITE™ electronic service tool can be used to clear active and inactive faults, as well as extinguish the MIL for OBD applications.
Shop Talk
Possible causes of this fault code include:
Internal leak of the aftertreatment fuel shutoff valve allowing fuel pressure to leak past the shutoff valve
Internal leak of the aftertreatment purge air actuator
Stuck closed, plugged, or clogged aftertreatment fuel injector.
Possible Cause:
1) Aftertreatment Fuel Pressure Sensor failure
2) Aftertreatment Injector failure
3) ECM calibration
Related
Categories Cumminz, DTC TRUCKS, Tags , 1, 1925, 2, 2018, 334, 3482, Aftertreatment, CM2450, Code, Cummins, Data, Erratic, Fault, FMI, Fuel, Incorrect, Intermittent, Newer, or, PID, Shutoff, SID, SPN, Valve, X124B, X15
Wiring Diagrams
Component Locators
Detroit$30.00
Rated 0 out of 5
- Isuzu IDSS 2021 Diagnostic Software
ISUZU$100.00
Rated 0 out of 5
- Wabco PIN Code Calculator Diagnostic Software PIN 1 PIN 2
Trucks software$10.00
Rated 0 out of 5
- Perkins EST 2016C Electronic Service Tool
Perkins$50.00
Rated 0 out of 5
- Detroit Diagnostic Link (DDDL 8.09) Engineering level 10
Detroit$40.00
Rated 0 out of 5
- Bendix Acom Pro 2022 v3 ( 1 PC ) BENDIX 2022 V3
Bendix$85.00
Rated 0 out of 5
- Volvo Premium Tech Tool PTT 2.8.130 Diagnostic Software 04.2022 ACPI ( 1 PC )
Trucks software$143.00
Rated 0 out of 5
- CAT ET 2021A (Caterpillar Electronic Technician) + Factory Password (1 PC )
CAT$65.00
Rated 0 out of 5
- CATERPILLAR FLASH FILE 2021 74 GB ( Collection 2021 ) sofware trucks
CAT$55.00
Rated 0 out of 5
CAT$50.00
Rated 0 out of 5
- CAT Password Recovery Tool for CAT ecm configuration files WINDOWS 10
CAT$20.00
Rated 0 out of 5
- Isuzu E-IDSS Diagnostic Service System 04.2022 ( 1 PC )
ISUZU$126.00
Rated 0 out of 5
- PACCAR Electronic Service Analyst 5.4.3.0 SW files 27.03.2021 software trucks
PACCAR$60.00
Rated 0 out of 5
- CAT ET 2022A Advanced diagnostic software for Caterpillar equipment
CAT$95.00
Rated 0 out of 5
- Hino DX3 1.22.10 2022 ( 1 PC )
Hino$96.00
Rated 0 out of 5
- Diamond Logic Builder DLB 2019 Database 2019
Navistar$50.00
Rated 0 out of 5
- Diesel Diagnostic Link 8.17 SP1 2023
Detroit$96.00
Rated 0 out of 5
- Caterpillar CAT ET 2021B Electronic Technician + Factory Password (1PC)
CAT$75.00
Rated 0 out of 5
- Volvo PROSIS Offline 2019 Parts Catalog Installation Service
Trucks software$45.00
Rated 0 out of 5
Related products
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- MACK MP8 2013 ENGINE service manual
MACK$30.00
Rated 0 out of 5
- SERVICE MANUAL Mack Marine M-E7
MACK$27.00
Rated 0 out of 5
- SERVICE MANUAL BOBCAT 435 SMS
BOBCAT$56.00
Rated 0 out of 5
- SERVICE MANUAL MACK E-TECH
MACK$28.00
Rated 0 out of 5
DETROIT$38.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROTRON TTV 1130-1145-1160
DEUTZ$32.00
Rated 0 out of 5
FUSO
Rated 0 out of 5
INTERNATIONAL ENGINES$34.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROPLUS 60-70-80
DEUTZ$25.00
Rated 0 out of 5
- SERVICE MANUAL BENDIX EC-60
BENDIX$17.00
Rated 0 out of 5